這個 3D Printer 專用鏟其實是 Jason 相當早期作品的復刻版，我認為使用 PLA 材質製成的鏟仔，相較於金屬製的會更安全，且不易傷到手和列印平台。
This is a remake of my early works. I think that having a scraper made with PLA would be safer and my hand and printing platform compared to a metal scraper.
▼
在設計這個鏟時，我有幾個要求：
1. 貫徹 Jason Workshop 的簡約設計風;
2. 要容易以 3D Printer 印製;
3. 列印時不需要支撐;
4. 不要在 3D Printer 平台上進行大面積的列印，以免作品拆不下來。
其實跟我平時的設計風格一模一樣 ^_^
When designing this scraper, I had several requirements:
1. Adhere to Jason Workshop’s minimalist design style;
2. Easy to 3D print;
3. No need for supports during printing;
4. Avoid large area printing on the 3D printer platform to prevent difficulty in removing the work.
Actually, it’s exactly the same as my usual style ^_^
▼
以下是尺寸圖。
Here is the dimension diagram.
▼
3D 列印時的建議擺法。
Suggested placement for 3D printing.
▼
Jason Workshop 的 3D 類作品會優先放到 Printables, 而 Thingiverse 則作為後備空間。
歡迎大家到 https://jasonworkshop.com/printables 下載！
如果覺得這個鏟不錯的話，拜託大家在 Printables 給我一個讚以及分享給更多的朋友知道吧！
In addition, Jason Workshop’s 3D works will be prioritized in the Printables.com, while Thingiverse will serve as a backup space…
Please visit https://jasonworkshop.com/printables for downloads!
If you think this scraper is good, please give me a Like on Printables and share it with more friends!
▼
