自家製筆筒 – Q1 pen holder

顏色筆是 Jason 在創作過程中不可或缺的重要工具,以往塗裝時需要在一大個膠箱裏翻來覆去尋找合用的顏色實在很麻煩,因此需要買一個筆架去整理顏色筆。但要尋找到合心意的筆架實在不容易,而且也不能確保在日後需要擴充時能否買到同款的筆架,於是就決定要自己設計以及用 3D Printer 印製,這樣我何時想要增添筆架也不是問題啦!

I have always had a strong interest in color pens and I need some pen holders to store them, but I couldn’t find suitable styles on the market. Therefore, I came up with the idea of designing a simple and beautiful pen holder that is easy to print and can be reproduced when needed.


在設計這個筆架時,我有幾個要求:
1. 貫徹 Jason Workshop 的簡約設計風;
2. 要容易以 3D Printer 印製;
3. 列印時不需要支撐;
4. 不要在 3D Printer 平台上進行大面積的列印,以免作品拆不下來。

確立了設計主軸後,大約花了半小時就畫了出來!

When designing this pen holder, I had several requirements:
1. Adhere to Jason Workshop’s minimalist design style;
2. Easy to 3D print;
3. No need for supports during printing;
4. Avoid large area printing on the 3D printer platform to prevent difficulty in removing the work.

After establishing the design concept, it took me about half an hour to draw it!


以下是尺寸圖。

Here is the dimension diagram.


3D 列印時的建議擺法。

Suggested placement for 3D printing.


另外 Jason Workshop 之後的 3D 類作品會優先放到 Printables, 而 Thingiverse 則作為後備空間吧…

歡迎大家到 https://jasonworkshop.com/printables 下載!
如果覺得這個筆架不錯的話,拜託大家在 Printables 給我一個讚以及分享給更多的朋友知道吧!

In addition, Jason Workshop’s 3D works will be prioritized in the Printables.com, while Thingiverse will serve as a backup space…

Please visit https://jasonworkshop.com/printables for downloads!
If you think this pen holder is good, please give me a Like on Printables and share it with more friends!